|
|
■ To install the standardized springs, please use the height adjustable parts (sold separately), or with TEIN's height adjustable shock absorber kit. Please refer to each pages for details.
■ All of TEIN's standardized springs are ground on both ends. |
|
|
|
|
|
■ We use SWOSC-KV silicon chrome metal (JIS standard) to pursue the maximum quality of high tension and endurance for all standardized springs.
■ Stable quality, endurance, and high performance is maintained by special procedure (cooling formation).
■ The straight type springs are measured by inner diameter. and, specified spring seat is required. The outer diameter changes with alignment. |
|
|
|
|
|
■ These springs are tapered and the bottom diameter is I.D.70mm, with two types of top diameters of I.D.90mm, I.D.100mm.
These are standardized springs which have been developed to adopt with original upper mounts for original double wishbone and multi - link suspension system.
Tapered Type Springs have the following outstanding characteristics.
■ Ideal for N1 and other vehicles whose upper mounts cannot be replaced under regulations.
■ By eliminating the upper spring seat, we have achieved low cost and adequate bump stroke.
■ It eliminates the damage to upper mount and other noise by maintaining same force input positions as original products.
■ As it is tapered, spring stroke can be maintained better than the straight type with same spring coefficient and length. |
|
|
|
|
|
■ By setting 2 springs in a series, variable spring rate can be achieved.
■ It gives unlimited setting range with wide winding point weight set ups.
■ The A spring is a series twin spring, and the B spring can be selected from straight type with I.D.70mm or tapered type springs.
A variable spring is achieved through changing over from original spring rate to B spring rate.
■ The spacer spring seat is necessary for installation with the A spring. |
|
Springs most suitable for rally and off-road uses are available.
Please refer to TYPE Gr.N ( F.R.S. Spec / Standard Spec ) pages for more information.
We can produce made-to-order springs to the desired shape, size and/or rate. Click here for details. |
|
Lineup & Price list |
|
|
MSRP excl Tax JPY 16,000/set (2 springs) |
|
Inside Diameter |
I.D.60 |
I.D.65mm |
Free Length |
200 |
175 |
200 |
225 |
250 |
300 |
Spring Rate |
Parts # |
Parts # |
Parts # |
Parts # |
Parts # |
Parts # |
Stroke |
Stroke |
Stroke |
Stroke |
Stroke |
Stroke |
3.0 |
|
|
SL030-01200
140 |
|
|
|
4.0 |
SN040-01200**
131 |
|
SL040-01200
134 |
|
SM040-01250
163 |
|
5.0 |
|
SQ050-01175
114 |
SL050-01200
125 |
|
SM050-01250
153 |
|
6.0 |
|
SQ060-01175
107 |
SL060-01200
125 |
SV060-01225
128 |
|
|
7.0 |
|
SQ070-01175
103 |
SL070-01200
121 |
|
SM070-01250
148 |
SK070-01300**
165 |
8.0 |
|
SQ080-01175
97 |
SL080-01200
111 |
SV080-01225
127 |
|
|
9.0 |
|
SQ090-01175
99 |
SL090-01200
105 |
|
|
|
10.0 |
|
SQ100-01175
96 |
SL100-01200
113 |
SV100-01225
118 |
|
|
12.0 |
|
SQ120-01175
93 |
SL120-01200
105 |
SV120-01225
113 |
|
|
14.0 |
|
SQ140-01175
91 |
SL140-01200
104 |
|
|
|
Inside Diameter |
I.D.70mm |
Free Length |
150 |
175 |
200 |
225 |
250 |
300 |
Spring Rate |
Parts # |
Parts # |
Parts # |
Parts # |
Parts # |
Parts # |
Stroke |
Stroke |
Stroke |
Stroke |
Stroke |
Stroke |
2.5 |
|
|
|
|
SC025-01250
176 |
|
3.0 |
|
|
|
SY030-01225
153 |
SC030-01250
168 |
|
4.0 |
SA040-01150
103 |
|
SB040-01200
135 |
SY040-01225
144 |
SC040-01250
162 |
|
5.0 |
SA050-01150
97 |
SW050-01175
112 |
SB050-01200
125 |
SY050-01225
138 |
SC050-01250
152 |
SD050-01300
184 |
6.0 |
SA060-01150
95 |
SW060-01175
110 |
SB060-01200
128 |
SY060-01225
135 |
SC060-01250
146 |
|
7.0 |
SA070-01150
96 |
SW070-01175
107 |
SB070-01200
125 |
SY070-01225
131 |
SC070-01250
147 |
|
8.0 |
SA080-01150
91 |
SW080-01175
103 |
SB080-01200
116 |
SY080-01225
127 |
SC080-01250
146 |
|
9.0 |
SA090-01150
88 |
SW090-01175
98 |
SB090-01200
114 |
|
|
|
10.0 |
SA100-01150
85 |
SW100-01175
96 |
SB100-01200
108 |
SY100-01225
120 |
|
|
12.0 |
SA120-01150
82 |
SW120-01175
93 |
SB120-01200
111 |
|
|
|
14.0 |
SA140-01150
82 |
|
SB140-01200
105 |
|
|
|
16.0 |
SA160-01150
78 |
|
SB160-01200
103 |
|
|
|
18.0 |
SA180-01150
78 |
|
|
|
|
|
20.0 |
|
|
SB200-01200
96 |
|
|
|
**Discontinued and only available while supplies last. |
|
|
MSRP excl Tax JPY 20,000/set (2 springs) |
Inside Diameter |
I.D.70mm-90mm |
I.D.70mm-100mm |
Free Length |
175 |
200 |
Spring Rate |
Parts # |
Parts # |
Stroke |
Stroke |
6.0 |
|
SJ060-01200
128 |
|
|
|
MSRP excl Tax JPY 10,000/set (2 springs) |
Parts # |
Inside Diameter |
Free Length |
Stroke |
Solid Length |
Adhesion Load |
Spring Rate |
CR019-01080 |
I.D.65mm |
80mm |
57mm |
23mm |
116Kgf |
1.9Kgf/mm |
CR005-01080 |
I.D.65mm |
80mm |
62mm |
18mm |
31kgf |
0.5kgf/mm |
SS016-01080 |
I.D.70mm |
80mm |
58mm |
22mm |
98Kgf |
1.6Kgf/mm |
CS004-01095 |
I.D.70mm |
95mm |
76mm |
19mm |
27kgf |
0.3kgf/mm |
|
|
MSRP excl Tax JPY 14,000/set (2 springs)
(For the race and the Gymkhana) |
Parts # |
Inside Diameter |
Free Length |
Stroke |
Solid Length |
Adhesion Load |
Spring Rate |
RH024-A1050 |
I.D.58mm |
50mm |
29mm |
21mm |
85Kgf |
2.8Kgf/mm |
RH023-A1070 |
I.D.58mm |
70mm |
47mm |
23mm |
111Kgf |
2.3Kgf/mm |
RH022-B1030 |
I.D.65mm |
30mm |
12mm |
18mm |
34Kgf |
2.7Kgf/mm |
RH022-B1045 |
I.D.65mm |
45mm |
27mm |
18mm |
74Kgf |
2.7Kgf/mm |
**Discontinued and only available while supplies last. |
|
|
Drop us a line, ask us any questions!
Click Here |
|