 |
|
 |
Convenient & Stylish!
Low Down Spring for K-Cars |
|
 |
|
| Discontinued models are available as CUSTOM MADE SPRING |
|
■Transform K-Cars into cool & stylish lowered appearance
■90mm road clearance secured, to conform to vehicle safety regulation (in Japan)
■Affordable pricing
■Equipped with silencer rubber, to eliminate unpleasant noise from spring
|
|
- Vanadium SAE 9254 Steel
- Use of Vanadium alloy steel SAE9254 [tensile strength 200kgf/mm2(1960N/mm2) or over] makes it possible to make coil diameter thinner than existing springs. This also enables reduction in weight and increase in stroke, thus reducing weight of suspension's moving parts and improving absorbing ability of uneven road surfaces.
- Silencer Rubber
- To prevent noise caused by coil-to-coil contact and/or from mounting portion, Silencer Rubber is applied to each spring, reducing unpleasant noise commonly caused by use of low-down springs (Except some models).
- Improved Rust-Prevention
- Surface of "S.TECH K-SPECIAL" is treated with powder coating, which forms thick film and is highly durable, in addition to zinc phosphate coating as pre-paint, which is quite effective in rust prevention. Such paint provides superior protection against snow melting agent (calcium chloride) compared to existing paint solvent.
|
|
| Set up for 30 to 50mm lowering |
"S.TECH K-SPECIAL" is set up to drop the ride height as much as possible (vary by vehicle models), to satisfy even the most
image-conscious users, but still maintains the minimum road clearance of 90mm to fully comply with car inspection standard. |
|
| Exclusive Setup for Each Vehicle |
| Each "S.TECH K-SPECIAL" is tested on actual car to find the perfect setting with the most suitable spring rate, unlike other low-down springs that are designed with flat rate increase compared to OE springs. |
|
Drop us a line, ask us any questions!
Click Here |
|
