HOME >> PRICE LIST >> Browse by products >> HONDA || PRODUCTS
=Specific model that the product is developed for and tested on.We have developed and set up the product to be most suitable for the particular vehicle model.
=Specific model that the product will be developed for and tested on.
=Compatible model.
=Compatible model. (Needs to adjust the position of the spring seat)
=May be installed but the operation not guaranteed. (The reason is noted in the chart)
Compatible model: Testing on the actual vehicle confirmed the compatibility and the same level of performance, as the model the product was developed for.
Silver EDFC Controller (EDK04-P2756) rereleased for a limited time.
Back by popular demand, 300 sets have been specially prepared.
But be quick! Only while stocks last.
Model
Chassis Code		 Grade Drive System
Displacement		 Conformity EDFC
Conformity
(Rebump)		 EDFC
Conformity
(Bump)		 Kit Part No.
MSRP		 Recommended Spring
Part No.
(sold separately)		 Ride Height
Drop
 Recommended
Ride Height
Adjustment Range		 Ride Height
Adjustable Range		 Note
Ft Rr
NSX
NA1
1990.09-2005.12 		TypeR RWD
3000
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH14-81LS1
¥312,000 (MSRP)
¥327,600 (incl TAX)		 φ65
12.0 k 175mm		 φ65
14.0 k 175mm		 Ft:-50
Rr:-40		 Ft:-60 to -40
Rr:-50 to -30		 Ft:-87 to -28
Rr:-55 to -21		 Recommended Spring: High Load Type. Front: Upper seats not included. Rr: Includes helper springs. Discontinued and only available while supplies last.
[Upon EDFC installation]
Front:
SUPER STREET: Bonnet/hood insulator needs to be cut or removed, if interferes.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
SUPER STREET: Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
S2000
AP1
1999.04-2005.11 		Base Model, Type V RWD
2000
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH64-81LS1
¥283,000 (MSRP)
¥297,150 (incl TAX)		 φ58
18.0 k 150mm		 φ58
18.0 k 125mm		 Ft:-40
Rr:-50		 Ft:-50 to -30
Rr:-60 to -40		 Ft:-60 to -22
Rr:-68 to -34		 Disassembly of arm etc. is required for installation. Ft＆Rr: Includes helper springs.
[Upon EDFC installation]
Front:
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
S2000
AP2
2005.11-2009.01 		Base Model, Type V RWD
2200
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH64-81LS1
¥283,000 (MSRP)
¥297,150 (incl TAX)		 φ58
18.0 k 150mm		 φ58
18.0 k 125mm		 Ft:-35
Rr:-45		 Ft:-45 to -25
Rr:-55 to -35		 Ft:-55 to -27
Rr:-63 to -29		 Disassembly of arm etc. is required for installation. Ft＆Rr: Includes helper springs.
[Upon EDFC installation]
Front:
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
INTEGRA TYPE-R
DC2
1995.10-2001.07 		TYPE-R FWD
1800
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH48-81LS1
¥272,000 (MSRP)
¥285,600 (incl TAX)		 φ58
24.0 k 125mm		 φ58
16.0 k 125mm		 Ft:-40
Rr:-45		 Ft:-50 to -30
Rr:-55 to -35		 Ft:-70 to -17
Rr:-75 to -27		 Ft＆Rr: Includes helper springs.
[Upon EDFC installation]
Front:
OE strut bar needs to be removed. Left side motor needs to be intalled at an angle to avoid interference with air conditioner line.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
Interior needs to be modified or removed, if it interferes with motor.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
INTEGRA TYPE-R
DC5
2001.07-2004.09 		TYPE-R FWD
2000
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSA02-81LS1
¥399,000 (MSRP)
¥418,950 (incl TAX)		 φ65
14.0 k 150mm		 φ70
16.0 k 115mm		 Ft:-40
Rr:-45		 Ft:-50 to -30
Rr:-55 to -35		 Ft:-55 to -20
Rr:-65 to -28		 Prevent reservoir tank and/or hose from interfering with tire etc. Recommended Spring: High Load Type. The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle.
[Upon EDFC installation]
Front:
SUPER RACING (rebump side): Motor and harness need to be waterproofed with silicon sealant.
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
INTEGRA TYPE-R
DC5
2004.09-2006.07 		TYPE-R FWD
2000
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSA02-81LS1
¥399,000 (MSRP)
¥418,950 (incl TAX)		 φ65
14.0 k 150mm		 φ70
16.0 k 115mm		 Ft:-40
Rr:-45		 Ft:-50 to -30
Rr:-55 to -35		 Ft:-55 to -20
Rr:-65 to -28		 Prevent reservoir tank and/or hose from interfering with tire etc. Recommended Spring: High Load Type. The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle.
[Upon EDFC installation]
Front:
SUPER RACING (rebump side): Motor and harness need to be waterproofed with silicon sealant.
Bonnet/hood insulator needs to be cut or removed, to avoid interference. OE strut bar needs to be removed.

Rear:
Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
CIVIC
EG6
1991.09-1995.09 		SiR FWD
1600
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH48-81LS1
¥272,000 (MSRP)
¥285,600 (incl TAX)		 φ58
24.0 k 125mm		 φ58
16.0 k 125mm		 Ft:-40
Rr:-45		 Ft:-50 to -30
Rr:-55 to -35		 Ft:-70 to -17
Rr:-75 to -27		 Ft＆Rr: Includes helper springs.
[Upon EDFC installation]
Front:
OE strut bar needs to be removed.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
Interior needs to be removed, to avoid interference.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
CIVIC TYPE-R
EK9
1997.08-2000.08 		TYPE-R FWD
1600
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSH00-81LS1
¥272,000 (MSRP)
¥285,600 (incl TAX)		 φ58
24.0 k 125mm		 φ58
16.0 k 125mm		 Ft:-40
Rr:-45		 Ft:-50 to -30
Rr:-55 to -35		 Ft:-72 to -16
Rr:-71 to -19		 Ft＆Rr: Includes helper springs.
[Upon EDFC installation]
Front:
OE strut bar needs to be removed.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
Motor needs to be installed parallel to the Interior.
SUPER RACING (bump side): Motor and harness need to be waterproofed with silicon sealant.
CIVIC TYPE-R
FD2
2007.03-2010.08 		TYPE-R FWD
2000
Rebump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-10120
Strut-
Bump
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSB56-81NS1
¥366,000 (MSRP)
¥384,300 (incl TAX)		 φ65
10.0 k 175mm		 Exclusive Spring
8.0 k		 Ft:-25
Rr:-25		 Ft:-35 to -15
Rr:-35 to -25		 Ft:-60 to -5
Rr:-60 to -25		 Includes H.A.S.
Rr: w/o Upper Mount. Ft: Recommended Spring: High Load Type. Rr: Is an exclusive spring. Rr: Can be selected from 8, 10, 12k.
[Upon EDFC installation]
Front:
SUPER RACING (rebump side): Motor and harness need to be waterproofed with silicon sealant.

Rear:
SUPER RACING (bump side): Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant.
*Recommended adjustment range value is the data obtained from actual testing.
*Adjusting outside recommended range might damage damper/vehicle and is nonconforming to safety standards.
*TEIN assumes NO responsibility for use outside recommended range.
*ONLY compatible with 'new' EDFC.
*Some modification may be required to be EDFC compatible, depending on the vehicle models. Contact us for more details.
Drop us a line, ask us any questions! about Products:
Click Here